ZLG CANFDNET-200U, Руководство пользователя

Страница: 27 / 33

CANFDNET-200U
High-Performance Dual-Channel Ethernet to CAN (FD) Converter User Manual
©2021 Guangzhou ZLG Electronics Co., Ltd.
24
User Manual
7.2 Configuration Parameters
Table 7.10 Configuration parameter description
Category Property Name Default
Parameter Description
Basic information
Device model
CANFDNET-20
0U
This item cannot be changed.
Firmware version - Current firmware version of the device, such as 1.00.00.
Hardware version - Current hardware version of the device, such as 1.00.00.
Equipment No. -
Device serial number. Each device has a different device serial
number. It is a 16-byte string.
Equipment name
CANFDNET-20
0U
Device name. The value can be changed, a maximum of 15
characters. ASCII characters can be used. Modifying this value is
very useful for users to identify multiple devices on the same
network.
Password operation
Current password 88888
Before changing other items, you must enter the correct
password. Use ASCII characters as the password. The password
can contain a maximum of 9 characters.
Whether to
change the
password
No
Only when you select "Yes", you can enter "New Password" and
"Confirm Password".
New password -
If "Whether to change the password" is "No", the password
cannot be changed. Used to enter a new password. The
maximum length of the password is 9 characters. For the
character range, see "Current Password" .
Confirm the new
password
-
If "Whether to change the password" is "No", the password
cannot be changed;
Used to confirm the new password. The content must be
consistent with the "new password".
Network Settings
DNS1 192.168.0.1 Preferred DNS server address.
DNS2 192.168.1.1 Alternative DNS server address.
For all
Ethernet/Vehicle
Ethernet
MAC address -
The MAC address is different for different devices. It can be
changed. The default MAC address can be restored.
DHCP enable No
After being enabled, the device will obtain information such as the
IP address, subnet mask, and gateway from the network. If it is
disabled, the user sets the IP address, subnet mask, and
gateway. Note: After confirming that there is a DHCP server on
the network, DHCP can be enabled. Normally, the router also has
the DHCP server function.
IP
192.168.0.178
(Universal
Ethernet)/
192.168.1.178
(vehicle
Ethernet)
Do not enter X.X.X.0 or X.X.X.255. An IP address is an address
on a network assigned to a network device, and it is unique on
the same network.
Subnet mask 255.255.255.0
The subnet mask is very important for the network. In the same
network, each IP address
and the subnet mask are equal to the obtained value. So, set
them correctly
"IP address" and "subnet mask".
Gateway
192.168.0.178
(Universal
Ethernet)/
192.168.1.178
(vehicle
Ethernet)
Enter the IP addresses of the gateway or router in this network.