CANDTU-400ER
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
15
User Manual
navigation bar.
The following describes the function and meaning of each configuration parameter of the
configuration tool.
4.3.1 CAN Configuration
Figure 4.6 AN configuration tab
The CAN Configuration tab contains the following parameters:
1) Channel selection
Selected: Enable the corresponding CAN channel.
Deselected: Disable the corresponding CAN channel.
2) Communication mode
Normal mode:
Listen only mode:
3) Communication baud rate
Provides commonly used CAN communication baud rates.
4) Use a built-in 120-ohm resistor (connected by default)
Selected: Connect the built-in 120-ohm resistor termination resistor
corresponding to the CAN channel.
Deselected: Disconnect the built-in 120-ohm resistor termination resistor of the
