CANDTU-100UR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
12
User Manual
Figure 4.5 Installation complete
6) Click "Finish". The configuration software and driver are installed.
4.2 Function Description
After the program is installed, there will be shortcuts to the configuration tool on the
desktop and start menu. Double-click the desktop icon to launch the program. The CAN
configuration page appears by default, as shown in Figure 4.6. The tool interface is
divided into four parts:
1) Menu bar:
Provide all operation commands of the configuration tool, including common
operation commands in the shortcut toolbar, restore factory settings, etc.;
2) Shortcut Toolbar
Provide common operation buttons of the configuration tool to complete the quick
operation of commands;
3) Side navigation bar
Provide multiple categories of information tabs to quickly switch tabs;
4) Information settings bar
Operate the specific configuration information based on the options in the left
navigation bar.
