ZK-D4330 (TP Version) User Manual
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
P a g e
|
23
8.2
Main Menu
In the standby mode, tap the "Touch Area" at the bottom right corner of the screen, or press the
OK
button on the control panel to enter the verification password input interface. For the first
operation of the device, please enter the factory password of the device:
100000
, and select
"
Confirm
" after completion. When the prompt "Verify Succeed", the verification is completed,
as shown in the following figure.
NOTE:
There are two ways to operate this device, the first is to click on the touch screen for
operation, such as directly clicking on the screen icon to select the content, clicking on the
icon to set the value, and clicking on the
back icon to confirm save and return to the
upper menu. The second is to use the control buttons for operation, and the following mainly
introduces the operation method of the control buttons.
Operation:
Press the
[OK]
button to enter the verification password input interface, then press the
[OK]
button to set the value, press the
[▲]
/
[▼]
button to switch, select "Confirm" and then press the
[OK]
button to save and exit.
