SpeedFace-V3L
User Manual
P a g e
| 62
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Failed ID
If the verification fails, the system will send the
failed ID to the device and replace the card
number or personnel ID with the new one.
Site Code
It is similar to the device ID. The difference is that
a site code can be set manually and is repeatable
on a different device. The valid value ranges from
0 to 256 by default.
Pulse Width(us)
The time width represents the changes in the
quantity of electric charge with regular
high-frequency capacitance within a specified
time.
Pulse Interval(us)
The time interval between pulses.
ID Type
Select the ID types as either User ID or card
number.
Network Diagnosis
8.7
It helps to set the network diagnosis parameters.
Tap
Network Diagnosis
on the
Comm.
Settings interface. Enter the IP address
that needs to be diagnosed and tap
Start the Diagnostic Test
to check
whether the network can connect to the device.
