SBTL9000 Series
User Manual
P a g e
| 12
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Cables Installation and Fixing
2.3
For the outlets of the concealed cables, please refer the below diagram indicating the mounting
holes. The input voltage for this swing barrier turnstile is
AC100V-120V/200V-240V
and its master
and slave are connected by an
8-core cable (signal)
and a
2-core cable (power)
. When installing
the swing barrier turnstile, the user only needs to connect it to the corresponding ports. Note that
the PVC conduits are laid
100mm
under the ground, with the height of the exposed part not
exceeding
100mm
. In addition, the conduit outlet is bent back to prevent the ingress of water into
the conduit.
The SBTL9000 Series installation holes and cabling positions is shown in Figure 2-2:
Figure 2-2
