SHENZHEN ISECUS ELECTRONIC CO., LTD
Add: Room 218A, No. 7, YaYuan Road, BanTian Town, LongGang Area, Shenzhen, China 518129
www.isecus.com
How to use QR500 in ZKTeco Access Control System?
Introduction
QR500 from ZKTeco is a new generation of intelligent reader with verification of QR code and 13.56MHz Mifare
cards and cellphone NFC as well.
It has fast scanning speed, high recognition rate, High compatibility, and can
be connected to any access controller that supports Wiegand input. It also support the RFID Functions, like
13.56MHz Mifare Ultralight / DESFire EV1, NTag, So that it can be applied in community management, visitor
management, hotel management, unmanned supermarkets and so on.
As a slave reader, QR500 can connect with ZKTeco access controllers and biometric access control terminals
through wiegand and RS485 ports.
Supported Popular Model:
Access Controller: C3-100, C3-200, C3-300, Inbio160, Inbio260, Inbio460
RFID & Biometric Access Control: SC700, F18, F19, F21, F22, TF1700, SF300, SF400, iFace, UFace, MiniAC Plus,
SpeedFace V5L, ProfaceX, etc.
1. Installation Diagram about QR500 connection with ZKTeco Access Control and Control Panel
QR500
QR500
Can replace
to other ZK
models like
Inbio, F18,
