ProlD Series Water Resistant RFID Access Control Reader
User Manual
P a g e
|
9
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
2
Terminal and Wiring Description
2.1
Terminal Description
Figure 2-1
Terminal Description
Table 2-1
Description of Terminal and Interfaces
Name
Interface
Description
Power
+12V
7 to 13V DC Input
Note:
Recommended AC adapter:
7 to 13V
, Current Draw
≤350mA 5V
.
GND
RS-485
RS485A
RS-485 Communication Interface
RS485B
Wiegand Out
WD0
Wiegand Output0
WD1
Wiegand Output1
Wiegand 26/34
WG26/34
Wiegand Output Bits
Note:
When terminal WG26/34 is connected to ground, the number of
Wiegand output bits is 26 bits. The default is not grounded, and the
number of Wiegand output bits is 34 bits.
Beep
BEEPER
Beep Input
Red LED
RLED
Red LED Interface
Green LED
GLED
Green LED Interface
Tamper
TAMPER
Tamper Switch
