MB10-VL
User Manual
P a g e
| 32
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Wireless Network
The device provides a Wi-Fi module, which can be built-in within the device module or can be externally
connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and establishes a wireless network
environment. Wi-Fi is enabled by default in the device. If you don't need to use the Wi-Fi network, you can
toggle the Wi-Fi to disable the button.
Select
Wireless Network
on the Comm. settings interface to configure the Wi-Fi settings.
Search the WIFI Network
WIFI is enabled in the device by default. Toggle the
button to enable or disable WIFI.
Once the Wi-Fi is turned on, the device searches for the available WIFI within the network range.
Choose the required Wi-Fi name from the available list and input the correct password in the
password interface, and then select
Connect to WIFI (OK)
and press
[M/OK]
to confirm.
WIFI Enabled:
Choose the required
network from the searched network
list.
Click the password field to enter the
password, and then select
Connect to
WIFI (OK)
and press
[M/OK]
to save
.
When the WIFI is connected successfully, the initial interface will display the Wi-Fi logo.
Add WIFI Network Manually
The Wi-Fi can also be added manually if the required Wi-Fi does not show on the list.
