1355.00
1
0
2
3
.0
5
3 Preparation
2
To install the Mars-S1000 Series/Mars Pro-S1000 Series you must have:
4 Installation
1. Place the turnstile to the installation site.
A Screwdriver:
To remove or install the screw on the device.
A Pencil:
To mark the device size and the screw hole.
A Electric Drill:
To drill holes according to the marked screw holes.
A Wrench:
To secure the M12 expansion screw on the device.
A Tapeline:
To measure the dimensions that need to be measured during the installation of the device.
