60 G3 Pro User Manual
Appendix 1 Printing Function
★
Remarks: Only some models support printing function.
Function Instruction
This function only supports serial port but not parallel port printing. Printing content is output via RS232 format;
verification information will be output every time to the serial port. Printing is available if a printer is connected, or a
hyper terminal can be used to read output content.
Connection between the device
and printer
Device Printer
2TXD <-----> 3 RXD
3RXD <-----> 2 TXD
5GND <-----> 7 FG
RS232 Pin-line order
[Connection Diagram]
[Operation]
1.
In the initial interface, press
[M/OK]
>
Comm.
>
Serial Comm
>
Baudrate
, and choose 19200 as the baud rate.
2.
In the initial interface, press [M/OK] > Print. To set the printing format and parameters, please refer to
Note:
1. The baud rate of the device and printer (hyper terminal) should be consistent.
2. If the default printing format is not satisfactory, you may contact our company to customize other
formats.
