FMD Pro 2.0
User Manual and Installation Guide
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
P a g e
|
13
2
Installation Setup
2.1
Safety Precautions
Install the detector on a stable and smooth area. Make sure that the
detector is installed firmly on the selected area.
It can be used for both indoor and outdoor operations.
Wait for the detector to be calibrated for 2 seconds when it starts initially.
Do not touch the detector during a security check to avoid false alarm.
Do not disassemble the unit without the guidance of a professional
technician.
2.2
Installation Site
The following section describes the requirements of the installation
environment.
2.2.1
Movable Metallic Items
The movable metallic objects must be kept away at 2 meters from the detector
to avoid false alarms.
2.2.2
Floor Vibration
The installation floor must be flat and fixed to avoid false alarm raised from the
movement of the people walking through the detector.
2.2.3
Electromagnetic Radiation and Interference
Since the detector uses Bilateral receiver technology, the detector must be
installed away at a distance of at least 1 meter from the sources of
electromagnetic radiation or electromagnetic interference. The parameters
that define the distance are determined by the installation environment and
the parameters vary for different installation environments.
