ZIV SW3 Скачать руководство пользователя страница 13

Страница: 13 / 122

SW3

GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN)

13/122

USER GUIDE - M0SW3D1905Iv04 - V04 May 2019

1.4.4

Equipment management

➢

Local and remote access, through a local console, Telnet server and SSH server, or

through a built-in web server, HTTP or HTTPS.

1.4.5

Additional services

➢

SNMP (SNMPv1, SNMPv2c and SNMPv3) agent.

➢

NTP server and NTP/SNTP client.

➢

client.

➢

RADIUS client.

➢

GARP/GMRP (IEEE 802.1D 2004).

➢

IGMP snooping.

➢

PVLAN (RFC 5517).

➢

LLDP (IEEE 802.1AB 2016).

➢

TLS 1.0.

1.4.6

Certifications

➢

CE.

➢

Designed for industrial applications.

➢

Designed for Electrical Substations.

1.4.7

Mechanical characteristics

➢

Mechanical enclosure:

suitable for DIN rail mounting

(EN 50022, BS 5584, DIN 46277-3).

➢

Dimensions:

Height: 167 mm; Width: 51 mm; Depth: 116 mm.

➢

Weight:

850 g

➢

IP protection level:

IP 2xB

➢

Material:

Grey (RAL 7024) zinc-plated iron.

For more mechanical details, see chapter 2,

Mechanical and electrical characteristics.

1.4.8

Operating conditions

➢

Power supply:

10.5-72 V

or multirange (36-360 V

, 80-265 V

DC operation is protected by diode against polarity inversion.

Multirange model is also protected against polarity inversion.

➢

Consumption:

Maximum consumption at 48 V

: 12 W.

Maximum consumption at 230 V

: 22 W.

Содержание SW3



























































































































Результаты поиска

Содержание SW3

Отзывы:

ZIV SW3, Руководство пользователя, Страница: 13 / 122

Результаты поиска

Содержание SW3

Отзывы: