Ziton ZP2-AF2-P, Руководство по установке

Страница: 115 / 176

Chapter 3: Configuration and commissioning
ZP2-A Series Installation Manual 109
Panel I/O configuration
Panel input configuration
Configurable options for control panel inputs are shown below.
Table 54: Configurable options for control panel inputs
Option
Description
Type Configures the input operation mode
Control Enables or disables an input
Input types are shown in Table 55 below. The default mode for all inputs is LG
(logged activation: an unlatched condition stored in the event log).
To configure a control panel input:
1. Select Field setup from the Main menu.
2. Select Panel I/O configuration.
3. Select Panel inputs, and then select the corresponding panel input.
4. Select the input type.
See Table 55 below for a list of available input types.
5. Press F4 (Enter), and then press F1 (Back).
6. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
Table 55: Configurable input types
Type
Description
LG (default) Logged activation. An unlatched condition that generates no indications
but it is only stored on the event log.
T_AL Technical alarm activation. A latched condition indicated on the LCD
and stored in the event log.
This input type can be used for gas detectors.
T_ALu Technical alarm activation. An unlatched condition indicated on the LCD
and stored in the event log.
This input type can be used for gas detectors and for connecting to
aspirating detector Alert outputs.
DT_AL Disable technical alarm inputs. When active, this input disables all the
technical alarm inputs (latched and unlatched).
DET Detector alarm.
This input type can be used for connecting to aspirating detector Fire1
outputs.