Ziton ZP1-X3E Series, Руководство по установке, Страница: 69 / 114

Chapter 3: Configuration and commissioning
ZP1-X3E Series Installation Manual 63
Table 17: Expansion board A configuration options
Display
Description Value
Module A function 01 to 96
Module A output 1 delay 00 to 10 minutes
Module A output 2 delay 00 to 10 minutes
Module A output 3 delay 00 to 10 minutes
Module A output 4 delay 00 to 10 minutes
Expansion board function
Use this menu to configure the expansion board function. The default value is 41.
For available presets, see “Expansion board functions” on page 93.
To configure the expansion board function:
1. Set the display as shown below, and then press Enter.
The Expansion I/O Fault/Disabled LED on the control panel interface and the
ON LED on the expansion board flashes fast to indicate that the module
function configuration menu is active.
2. Select a value from 01 to 96 using the value selection buttons (2 and 4).
3. Press Enter.
4. Save your changes.