Ziton ZP1-X3E Series, Руководство по установке, Страница: 102 / 114

Appendix A: Configuration presets
96 ZP1-X3E Series Installation Manual
Preset ON status Output Delay
80 Fire routing ON 1 No
2 No
3 No
4 No
90 Fire Sounders ON 1 No
2 No
Extinguishing sounders ON [4] 3 No
4 No
91 Fire Sounders ON 1 No
2 No
3 No
4 No
92 Extinguishing sounders ON 1 No
2 No
3 No
4 No
96 Extinguishing activation sounders ON
[3]
1 No
2 No
Extinguishing released sounders ON
[3]
3 No
4 No
[1] Fail-safe mode (output is active when there is no fault).
[2] Faults and disable options are linked to the expansion board indications.
[3] Not considered to signal supervision faults and linked to the expansion I/O indications.
[4] Faults are signaled in the Extinguishing Sounders LED. Output activates continuously and the
tone (for activation or released) has to be provided and configured in the sounder device.
EN 54-13 supervision and Class A expansion board
outputs
Note: The following presets are available for installations that use
EN 54-13 supervision (the SU setting is A). See “Supervision mode” on page 34
for more information.
Table 45: Expansion board functions (EN 54-13, Class A outputs)
Preset
ON status Output Delay
05 Z1 alarm 1 Yes
2 Yes
Z2 alarm 3 Yes
4 Yes