Ziton ZP1-F2, Руководство по установке

Страница: 8 / 113

Chapter 1: Introduction
2 ZP1-F Series Installation Manual
Product range
The ZP1-F Series includes the models shown below.
Model Description
ZP1-F2 Two-zone conventional fire alarm control panel
ZP1-F4 Four-zone conventional fire alarm control panel with fire routing
ZP1-F8 Eight-zone conventional fire alarm control panel with fire routing
All models have been designed in accordance with EN 54-2, EN 54-4,
BS 5839-1, NBN S 21-100, and NEN 2535 standards. For further details, see
Appendix B “Regulatory information” on page 101.
Product compatibility
Products compatible with these control panels are listed in the product
compatibility list. Only those products specified in the compatibility list are
guaranteed to be compatible.
To download the latest product compatibility list, visit firesecurityproducts.com.
Operating modes
Supported operating modes are shown in the table below. The default operating
mode is EN 54-2 (with EN 54-13 supervision disabled).
Table 1: Operating modes
Operating mode
EN 54-13 option
available [1]
Region
EN 54-2 (default) Yes European Union
EN 54-2 Evacuation Yes European Union (Spain)
EN 54-2 Scandinavia Yes European Union (Scandinavia)
BS 5839-1 (No 2nd stage) No United Kingdom
BS 5839-1 (2nd stage) No United Kingdom
NBN S 21-100 Yes Belgium
NEN 2535 [2] Yes The Netherlands
[1] EN 54-13 supervision requires compatible system wiring and devices and must be enabled
by the installer in the control panel configuration.
[2] Requires a 2010-1-SB expansion board to be installed (not supplied).