ZIROX SGM7.2, Руководство пользователя

Страница: 8 / 39

Oxygen Monitor SGM7.2 3 Safety Regulations
3 Safety Regulations
The following regulations for industrial safety give basic
information about possible hazards during handling and
operation of the buffer gas monitor SGM7.2. Therefore, they
must be observed and strictly followed by the operation and
service staff.
•
Secure and proper function of the SGM7.2 can only be
guaranteed when the contents of this manual are known.
Therefore, all chapters of this manual must be read
carefully before installation and operation of the SGM7.2.
•
The SGM7.2 may only be used for applications stated as
authorized (see chapter 2).
•
The SGM7.2 may only be installed, operated, and
maintained by trained staff.
•
In any case, the SGM7.2 must be connected to the main
supply with a socket with earth connection by the supplied
cable.
Explosive gas mixtures, halogens in high concentration, and
gases containing sulfur (e.g. SO
2
) are not permitted to be
measured by this SGM7.2.
Due to the high operation temperature of the sensor, the SGM7.2
produces much heat.
It has to take care that the piece of equipment is not covered so
strongly that it will be come to overheatings.
Vertical installation is not permitted to avoid possible damages
to the device by localization of heat.
Switch off and disconnect the device from the power supply
before opening the housing cover of the SGM7.2.
Special safety recommendations for possible hazards during
special work or sequences of work are given in the relevant
text.
HB_SGM72_Rehm_eng.DOC
8