background image

       ___                           ZipSpin      

 

14 

FAQ’s 

 
What if the Duplicator will not power on? 

Make sure the unit is plugged into a power outlet and the on/off switch is pushed in all the way. 

 

What if the duplicator is having trouble making a copy, what can be done?

 

The most common problem with discs playing but not duplicating can be attributed to overall quality. 
Some factors affecting disc quality include brand of blank media used, physical damage, and write quality. 
It is important that the disc is free of damage or blemishes and produced on a high quality brand of media.

 

Make sure that the “master” DVD has been finalized.  
Make sure the “master” DVD is not encrypted or is not a copy protected original. 
Make sure you have high quality, blank pieces of media. 
Make sure your master disc and blank disc are the same format. (-R to –R or +R to +R) 
Make sure you’re not trying to copy a CD to a DVD or DVD to CD.  
Try using a different brand of blank media. 

 

What if the duplicator is having trouble reading a DVD, what can be done?

 

Make sure you have Content on the “master” disc.   
Make sure the “master” disc in good condition. (Disc is not scratched) 
Make sure the disc is placed in the drive properly. (Data side down) 
Make sure the “master” disc has been finalized. 
 

What does "Stand-Alone" mean?

 

No computer is required to make copies of DVDs. Plug it in, turn it on, insert source DVD and blank media, 
close the drive trays and the duplicator starts copying. 
 

Can I copy Hollywood DVD movies with a ZipSpin duplicator?

 

No, commercial movies are copy protected and cannot be copied with this or any duplicator. You can 
copy your own video creations. 
 

Can I copy CDs in a ZipSpin DVD duplicator?

 

Yes, you can copy CDs in this duplicator. Just use blank CD-R Media that is certified at least 40X, and 
use the same process used to duplicate a DVD. 
 

Can I copy DVDs to CD Media in ZipSpin duplicators?

 

No, DVDs will only copy to blank DVD Media. 
 

Can I copy DVD+R to DVD-R in ZipSpin Duplicators? 

No, you can only copy DVD-R to DVD-R or DVD+R to DVD+R. 
 

Can I connect this ZipSpin duplicator to my PC?

 

No.  You would need to purchase a model that has USB or FireWire Connectivity.  If it does,

 you can 

connect to a PC, and create your own custom DVDs and CDs. 
 

How do I clean my ZipSpin duplicator? 

The best maintenance for your ZipSpin duplicator is preventive maintenance. Using a system in an area 
with excessive dust, smoke, or other contaminants is not recommended since it will increase error rates 
and reduce hardware life expectancy. Some light cleaning can be performed; you can use a can of 
compressed air for dusting out drives.

 

 

If you are unable to solve your technical problems, do not return the unit right 
away. Please call 714 892- 8212 or email us at [email protected]  

Содержание C-121-Pro















Отзывы: