Zippie Neptune 2, Инструкция по применению, Страница: 26 / 36

ENGLISH
26 Neptune 2 Rev.1.0
26.0 Tilt In Space Standard Base
To Perform the Tilt in Space on the Standard Base
• Lift safety latch (B) up to prepare the base for the tilt
adjustment.
• Lift operation latch (C) up until it stops, disengaging bar (D).
• Tilt the base interface to the desired angle. The adjustment
range can be seen via the groove at the side of the seat base.
When the desired angle has been achieved.
Close operation latch (C) by pushing down until it bar (D)
locates securely into a set position groove (F).
• Push down safety latch (B) to prevent accidental operation of
the tilt in space.
• Always ensure that the groove on the safety latch (B) is
securely located onto the bar (D) to secure the seat into
place.
Fig.26.1
Fig.26.2
27.0 Folding Push Handle (Multi Height
& Tilt Base)
Fig.27.1
A
Only use the push handle to move the chair.
The push handle should be folded down when not in use.
• Depress both buttons (A) on the inside of the handle.
• Manually alter the position of the handle by pushing the top
section down.
• To unfold pull the handle up until you hear a click ensuring it
is in place.
Fig.27.2
28.0 Push Handle Folding and Angle
The push handle should be folded down when not in use.
• Depress both buttons (A) on the inside of the handle.
• Manually alter the position of the handle by pushing the top
section up or down.
• To adjust the angle simply re-position and release the
buttons.
• To unfold, pull the handle up until you hear a ‘click’ ensuring it
is in place.
WARNING!
Items should not be placed or hung from the push handle as
this can compromise the stability of the base and may lead to
injury or damage to the system.