Zippie Neptune 2, Инструкция по применению, Страница: 17 / 36

ENGLISH
17 Neptune 2 Rev.1.0
WARNING!
• When mounting the seating system to a base for the first
time, or when an adjustment has been made to the size of
the system, a stability assessment should be carried out prior
to use of the equipment.
• Once you have adjusted the seat length, always ensure
these points are firmly fixed and are checked as part of
maintenance of the chair.
Adjusting the Seat Depth
• Loosen fixing bolt or wing knob (A) (tool-less option) on both
sides of seat. (Fig.9.1).
• Slide backrest forward to achieve desired depth.
• Re-tighten bolt or wing bolt.
NOTE:
• When increasing the seat depth it is best to stand at the rear
of the chair with the brakes applied and pull the back frame
towards you.
• When reducing the seat depth you should do the same whilst
standing at the front of the chair.
Fig.9.1
WARNING!
Always ensure that the back is secure and that the lever is
tightened before using the chair.
Adjusting the Back Angle (Fig.10.1-10.2)
• Loosen fixing lever at the backrest whilst supporting backrest.
• Rotate backrest to the desired position by pulling back or
pushing forward.
• When the desired back angle has been reached re-tighten
the fixing lever.
Fig.10.1
Fig.10.2
9.0 Seat Depth - Adjustments
10.0 Back Angle - Adjustments
A