Zipper Mowers ZI-MOS 4T, Руководство пользователя

Страница: 32 / 43

ZIPPER MASCHINEN GmbH  www.zipper-maschinen.at Strana 32
Motorová kosa / brush cutter ZI-MOS 4T Seite 32
15 OPERATION
15.1 TRIMMING UNIT ASSEMBLY
Put the flange E onto the thread bolt and fix it against
twisting by inserting the screw driver through the two bor-
ings as shown in the picture.
Now screw the trimmer
F onto the thread, still being fixed
with the screwdriver.
15.2 Mounting of the blunt blade
Put the distance ring E and then the mowing cutter onto the
thread bolt. Fix the assembly with the screwdriver against
twisting.
Now add the flange
G and the cover H onto the thread bolt
and fix it.
15.3 Belt assembly
Hang the belt into the belt hanging assembly on the pole.
Hängen Sie den Gurt in die dafür vorgesehene Öffnung ein.
Strap the belt around your hips so that the anti-vibration pad
is lies onto your right hip on the side.
The shorter belt part you strap horizontally around your
sholder. The longer belt part diagonally. Adjust the belt
lengths so that the machine weight is distributed evenly onto
the two shoulders.
Never work without using the belt.
F
E
E