ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
33
ZI-HAEK15000
•
Since the machine is not spring loaded, it tends to wobble more on rough roads. Be especially
careful when towing over bumpy or rough terrain.
•
Ensure that the support wheel is in the up position and fixed in place.
14
ASSEMBLY
14.1
Preparation
14.1.1
Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or missing
parts to your dealer or the shipping company immediately. Visible transport damage must also be noted
immediately on the delivery note in accordance with the provisions of the warranty, otherwise the goods
are deemed to have been properly accepted.
14.1.2
Requirements for the installation site
The selected installation site must meet the safety requirements and the dimensions of the machine. Place
the machine on a level, solid surface to prevent the machine from tipping over.
The chosen installation site of the machine must comply with the local safety regulations and comply with
the specific safety instructions for the machine for the infeed/discharge of shredding material as well as the
ergonomic requirements for a workplace with sufficient lighting conditions.
N OTE
The floor at the installation site must be able to bear the load of the machine!
When dimensioning the required space, take into account that the operation, maintenance and repair of
the machine must be possible without restrictions at all times. In the case of long workpieces, no crushing
or shearing points may occur in the extension area (=danger area).
14.2
Assemble
The machine has been disassembled for transport and must be reassembled before use. Follow the instruc-
tions below: