TECHNIKA
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Řezačka obkladů / Stone cutting machine ZI-FS115
Strana 22
15.1.1
Changing the diamond saw blade. see 13.1
15.1.2
Cleaning
16
TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Possible Cause
Solution
Engine will not start
Plug is damaged / defective
Renew plug from electrical specialist
Saw blade wobbles
cutting wheel shaft
Check ball bearings, shaft, flange
and nut.
Replace if defective
16.1
Disposal
Do not dispose of your waste in the ZI-FTS115. Contact your local
authorities for information regarding the available disposal options.
Improper disposal can lead to contamination of soil, ground water soil
seepage of hazardous and noxious substances, and thus reach finally
through contaminated water into your food supply and your health
you gefährden.Wenn replace your old unit with a new one at your
local dealer, is obligated to take back your old equipment free of
charge for the purpose of proper disposal.
N O T E
Cleaning: The use of paint thinners, gasoline, corrosive chemicals or abrasive
cleaners will result in damage to the surface!
Therefore:
When cleaning, use only mild detergent
