MAINTENANCE
ZIPPER MASCHINEN GmbH
Seite 32
Erdbohrer / earth auger ZI-EBO100G
Seite 32
12.4
Grease the gear box
Grease every 25 operation hours the gearing of the earth
auger with a grease gun. Use for this purpose commercial HQ
gearing grease.
You will find the lubrication nipple
(Fig. J)
on the side of the
gearbox.
12.5
Clean the air filter
A clogged air filter reduces the engines power output drastically and causes engine
disfunction. Furthermore it reduces the engines lifespan!
Loosen with a hex-key the screw fixing the air filter cover
(Fig. E)
.
Take off the cover and remove the filter (
Fig. F)
.
Clean the air filter
(Fig G)
with water. Wring it out strongly. Let it dry. Drip some
drops of oil onto the filter. Mount the filter back and mount on the cover again.
12.6
Disposal
DO NOT dispose your machine in the residual waste! Contact your local
authorities for information about best available disposal possibilities in your
area. Drain fuel from the fuel tank completely before disposing the earth
auger. Disaggregate the auger into its components before disposing its
components.
12.7
Storage
When you store the machine longer than 30 days:
Drain fuel from fuel tank.
Remove the spark plug, pour into the cylinder some drops of motor oil. Now
pull the starter cable out slowly so that the engine revolutes several times in
order to distribute the oil in the whole combustion chamber.
Clean the spark plug as described in 1.6.3 and mount it back.
Cover the machine with a cloth sheet and store it at a dry place.
Example of grease gun
NOT included in delivery!