TROUBLESHOOTING
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Kompressor / Air Compressor ZI-COM 24 / 50
Seite 26
16
TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Touble
Possible cause
Solution
Pressure can no
longer be stored
Valve seals broken
Replace the seals
Engine overheats
low oil level
dirty air filter
Refill oil
Clean or replace the air filter
Compressor runs
but produces no
pressure
Clogged air filters
Defective seals
Defective valves in the cylinder
head.
Clean or replace the old air filter
Replace the seals
Replace the valves
Engine will not start
No electricity
Check the connection to an exist-
ing electrical grid.
Let the engine cool down and
then drag the red pressure switch
(on / off)
After reaching the
escapes cut-off
pressure Com-
pressed air through
the relief valve und
Pressure switch to
reach the starting
pressure
Leaking or defective check valve
Check valve is damaged
Clean or replace check valve in-
sert
Replace check valve
Compressor on
frequently
Very much condensate in the
pressure boiler
Overload compressor
Drain condensate