MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
33
ZI-KTS40V-AKKU
14
MAINTENANCE
A T T E N T I O N
Unplug battery and safety switch (if equipped) before all maintenance and
settings!
Serious injury due to unintentional or automatic activation of the machine!
Always wear protective gloves while working on the cutting tool!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
14.1
Maintenance plan
Before each work:
Check the chain saw (tight fit, sharpness, damage, lubrication)
After each work:
Clean oil guide groove in the saw rail
Check saw chain oil level, top up if required.
14.2
Cleaning
Once a month the machine and all its parts must be thoroughly cleaned.
N O T I C E
The usage of certain solutions containing ingredients damaging metal surfaces as well as
the use of scrubbing agents will damage the machine surface!
Never use running water or a high pressure cleaner to clean the machine.
After each use, clean the machine using a dry cloth or a brush if the machine is very dirty.
Keep the ventilation slits clean and dustfree.
14.2.1
Oil guide groove in the saw rail
Remove saw rail.
Remove dirt from the oil guide groove using a suitable tool. Use a plastic spatula, not a steel tool!
Re-attach saw rail.
