OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
21
ZI-STE1200IV
Chemical risks
Never use or refuel a gasoline or diesel engine in a closed area without adequate ventilation.
Carbon monoxide emissions from the internal drive units of the engine can cause in confined spaces through
inhalation health effects and death. Therefore use the machine only in well-ventilated rooms or outdoors in operation.
Liquid fuels can cause serious damage on the skin and the environment.
Risk of electric shock
Direct electrical contact may cause electric shock.
Never touch the unit with wet hands. Provide adequate grounding.
Hearing damage
A longer stay in the immediate vicinity of the running unit may cause hearing damage.
Wear ear protectors!
These risk factors can be minimized through obeying all security and operation instructions, proper machine
maintenance, proficient and appropriate operation by persons with technical knowledge and experience.
In spite of all safety is and remains her healthy common sense and their corresponding technical qualification /
training for use of the machines most important safety factor!
11
OPERATION
Please check the product contents immediately after receipt for any eventual transport damage or missing parts.
Claims from transport damage or missing parts must be placed immediately after initial machine receipt and
unpacking before putting the machine into operation. Please understand that later claims cannot be accepted
anymore.
11.1
Pre-operation check
11.1.1
Check engine oil
A T T E N T I O N
The generator is delivered without engine oil and fuel!
Engine oil 15W40 must be filled before first use!
See capture maintenance => engine oil change
11.1.2
Check fuel
Place the machine on a firm and flat surface.
Open the fuel cap.
Check the fuel filter.
Never refuel without fuel filter!
Fuel must be unleaded gasoline
NEVER REFUEL IF THE ENGINE IS RUNNING!!
11.2
Operation instructions
N O T I C E
Always place the machine on a firm and flat surface! No turning, tilting or moving during the
engine is running
Always check oil and fuel level before starting
Do not connect the appliance before the unit is running at full speed. Disconnect the
appliance before turning the unit off.
Connected devices must be in perfect condition.
Keep the cable length to the consumer as short as possible.
