SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
19
ZI-STE1200IV
10
SAFETY
10.1
Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly instructions, operating
and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be informed about the
machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
For applications operated with a 230 V alternating current source. When using the device with household appliances, please
check their suitability in accordance with the relevant manufacturer instructions.
Any manipulation of the machine or its parts is a misuse, in this case
ZIPPER-MASCHINEN
and its sales partners
cannot be made liable for ANY direct or indirect damage.
W A R N I N G
The generator is to be operated only with equipment whose voltage specifications conform
with the generator's output voltage.
The generator has an oil pressure protection. If oil level is low, it is not possible to restart
the engine.
Never connect the generator to the power supply (socket-outlet)!
Never connect the generator with other energy sources (generators)!
Never change the motor and machine settings.
Ambient conditions
The machine may be operated:
humidity
max. 70%
temperature
+5°С to +40°С (+41°F to +104°F)
max. altitude above sea level
1500m
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use:
The operation of the machine outside the stated technical limits described in this manual is
forbidden.
Operation of the machine function without safety devices is forbidden.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not being certified
is forbidden
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in this user-manual is
forbidden.
The unattended operation on the machine during the working process is forbidden!
Never cover the running generator.