MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
17
ZI-MUP350 / ZI-MUP750
14
MAINTENANCE
A T T E N T I O N
Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
14.1
Cleaning
After each workshift the machine has to be cleaned.
Clean the suction slots on the suction foot if necessary with clear water.
N O T I C E
The usage of certain solutions containing ingredients damaging metal surfaces
as well as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild detergent
14.2
Storing
Make sure there is no water in the machine. The machine has to be completely emptied and stored
in a try area with frost-proof protection. Adhesion of mechanical seals can be prevented if you rinse
the pump with appropriate oil (for example, with vegetable oil).
14.3
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer for
a replacement unit, the latter is obliged to exchange your old.
