ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
27
ZI-HAEK4100 / ZI-HAEK11000
Axis:
Tilt the blades chassis slightly forwards, push the
axis through the bracket and fix with Allen screw,
washer and nut.
Wheels:
Place on both ends of the axis a washer. Push a
wheel over the axis. Secure with a spacer and
splint.
In-feed:
Place the in-feed on the blades chassis so that
the mounting holes coincide with the holes on
the in-feed.
Fix with screws, washers and nuts.
Attention: Risk of cutting!
Emergency frame:
Insert both ends of the emergency frame into
the holders and secure with a splint.
In-feed support:
Fix the in-feed support with the screws.
Use the 2 long screws on the outside!
Safety switch:
Insert the cable (a) into the plug of the
cable (b).
Then connect the cable (c) to the
motor using screw (d).
