CLEANING, MAINTENANCE, STORAGE, DISPOSAL
22
ZI-EWB300-160L
14
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
14.1
Cleaning
N OTICE
The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
•
Clean the outer parts with a damp sponge.
•
Never clean the electronic parts with water!
•
Check the machine and remove the deposits and / or residues with a brush.
14.2
Maintenance
CAU TION
Unplug battery before all maintenance and settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be serviced
by trained persons only.
N OTICE
Clean your machine regularly after every usage – it prolongs the machines lifespan and is
a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.
14.2.1
Maintenance plan
After each workshift:
•
Check the cables (tight fit, damage)
14.3
Storage
•
Clean thoroughly all components before storage.
•
Store all components separately in a dry area at not less than 0 ° C (optimum for battery 10-25°C).
•
Charge the battery fully before storing.
N OTICE
During longer standstill but at least after three month charge the battery.
14.4
Disposal
Observe the national waste disposal regulations. Never dispose of the machine, ma-
chine components or equipment in residual waste. If necessary, contact your local
authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer, he is
obliged in certain countries to dispose of your old machine properly.
