MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
31
ZI-HET40V-AKKU
Saw longer branches piece by piece.
When limbing trunks lying flat on the ground, first always
saw off the branches pointing upwards. Do not cut through
supporting branches until the trunk has been sawn into
lengths.
ATTENTION
Branches which are supported or under tension may wedge
the saw chain in the wood!
14
MAINTENANCE
WARNING
Remove the battery before carrying out maintenance work on the machine! This
prevents damage to property and serious injuries due to unintentional switching
on of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
NOTICE
Clean your machine regularly after every usage – it prolongs the machines lifespan and is
a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!.
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
14.1
Maintenance plan
Before each work:
Check the chain saw (tight fit, sharpness, damage, lubrication)
After each work:
Clean oil guide groove in the saw rail
Check saw chain oil level, top up if required.
14.2
Cleaning
Once a month the machine and all its parts must be thoroughly cleaned.
NOTICE
The usage of certain solutions containing ingredients damaging metal surfaces
as well as the use of scrubbing agents will damage the machine surface!
Never use running water or a high pressure cleaner to clean the machine.
