TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
19
ZI-LPE18-AKKU
12.1
Cleaning
Once a month the machine and all its parts must be thoroughly cleaned.
N O T I C E
The usage of certain solutions containing ingredients damaging metal surfaces as well as
the use of scrubbing agents will damage the machine surface!
Never use running water or a high pressure cleaner to clean the machine.
After each use, clean the machine using a dry cloth or a brush if the machine is very dirty.
Keep the ventilation slits clean and dustfree.
12.2
Storage
Store the machine in a dry and frost-free place (10-25 °C).
Store the battery and the machine separately.
Charge the battery before storing the machine in winter.
Keep the machine, in particular its plastic components, away from brake fluids, petrol, petroleum
products, penetrating oil, etc. They contain chemical substances which may damage, attack or
destroy the plastic components of the machine.
Fertilisers and other garden chemicals contain substances which may have a highly corrosive effect
on the metal parts of the machine. Therefore do not store your machine near these substances.
12.3
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a
replacement unit, the latter is obliged to exchange your old.
13
TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, UNPLUG THE BATTERY!
Trouble
Possible cause
Solution
Motor does not start
Battery is not plugged in
plug in battery
Battery is not charged
Recharge battery
Switch is damaged
Check switch
Battery cannot charged
anymore
Contact failure
Check contact pins
Battery damaged
Change battery
N O T I C E
Should you in necessary repairs not able to properly to perform or you have not
the prescribed training for it always attract a workshop to fix the problem.