R I V E T T / R O C K E T T
40
Turn fin mounted to sponson transom.
Lite ply cowl deck glued
together.
Forward cowl former. Note waxed paper.
Use the ¼-20x3/4 socket head screws to
mount the turn fin bracket to the blind nuts
in the right sponson.
You may have to run a ¼-20 tap in the
blind nuts if there is epoxy in the threads
from sealing the interior.
If all is well with the turn fin, remove it.
Cowling
The cowling is made from a lite ply deck
with the epoxy glass cowling glued to it.
You should have already sealed one side
of the cowl deck.
Glue the two halves together. Do not
adjust the way the decks come together
as they are designed to bow slightly
when you glue them together.
Use waxed paper and put the forward
cowl deck former in place with its 3/16
dowel. The waxed paper will prevent the
deck and former from being glued to the
boat. Use small clamps inside to hold the
former flush with bulkhead 1.
Do the same with the rear former, only
use small clamps to hold it slightly above
flush.
Set the cowl deck in place and center it
on the deck support strips.
Содержание RIVETT
