E A S Y V E E
20
Make sure the holes in the spines face forward.
Tack glue the center bottom sheeting prior to
fiberglass.
Deck support dowel and doublers in place.
Glue in the two spines. The holes in the spines
indicate the front end.
Glue in the center spine. It butts against the keel.
The two holes in the center spine indicate the top
front.
You can also tack glue the bottom sheets at this
time. Put a drop of medium CA about every two
inches or so, check that the bottom sheets are
properly aligned, and hit the drop with a shot of
accelerator.
Next we will prepare the deck support dowel.
This is used when launching the boat, to give
support so that the deck isn’t damaged during one
handed launching. You must determine which side
the support will be on. Most will be on the left side,
for right handed launching.
If you plan on always launching your own boat, and
are left handed, go ahead and mount it on the right.