Zip ZIP116, Инструкция по эксплуатации

Страница: 191 / 413

© 2023 System Q Ltd
185
Index
ZipNVR.com
Enabling SOB
To enable or disable SOB for each camera just tick or untick the Switch check box.
Sensitivity
By setting the Sensitivity you can avoid false triggers or capture slight movements.
1 is the lowest sensitivity level and will only trigger when there is a large, clearly
noticeable object is introduced or removed from the SOD area. Setting a low
sensitivity level can prevent false triggers for something like a tree or bush moving in
the wind.
4 is the highest sensitivity level and will trigger when small objects are introduced or
removed from the SOD area. High sensitivity levels are more suited to internal
cameras away from environmental conditions.
Scene
You should set the Scene to match where the camera has been installed. Setting the
Scene correctly allows the recorder to make allowances for typical light levels and
produce more accurate results. You can choose between
Indoor or Outdoor from
the Scene drop down list to best suit the camera's installation.
Alarm Handling
Clicking the Alarm button will open the Alarm Handling screen where you can set
what actions the recorder will take when a stationary object alert is triggered. For
more information on setting up alarm handling see the
Alarm Menu - Smart
section.
Saving Changes
When you are happy with the current settings click the Apply button to save your
changes. If you exit the window without saving any changes will be lost.
9.7.3.1 Video Menu - Smart - SOD Setup
When you click a camera's Setup icon in the SOD sub-menu the SOD Setup
screen will be displayed.
In the SOD setup screen you can create up to 4 stationary object areas so that you
can monitor when objects are introduced into or removed from them.
243
184