26
Installation instructions
802742UK V4.00 Sept 2018 - Zip HydroTap Industrial
Technical support
Tel: 0345 6 005 005 Email: [email protected] www.zipwater.co.uk
5.1 Generic installation arrangement instructions
Read these instructions before commencing Command Centre
installation,they apply to all installation arrangements.
90º bend
Connect to HydroTap Command Centre
Braided hose for mains
water supply
Con strainer
Mains cold
water supply
•
Read these instructions in conjunction with the following.
Scale filter head 2017 instructions (supplied with the scale filter head).
!
Section 5
Command Centre installation
•
Install the mains water braided hoses to the Command Centre before locating in place.
•
In the following diagrams the adjacent symbol
denotes connections not required for specific HydroTap
G4 models.
•
Ambient mains water braided hose length is 750mm.
•
Electrical power cable is 1.8m long.
•
The Command Centre
must be installed within the limits of
the hose and cable lengths supplied.
•
All silicon tubes / plastic pipes must be cut to size. They
must have a constant fall back to the Command Centre.
•
Isolation valves are not supplied.
