12
INSTALLATION INSTRUCTIONS & USER MANUAL
T210013 V1.00 FEB 2018 -ZIP HYDROCHILL 20
TECHNICAL SUPPORT
TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
INSTALLATION
Unpacking
• Remove the plastic straps.
• Lift the internal cardboard box up and out
of the cage.
• Once you have unpacked the HydroChill,
check to ensure that it is not damaged.
• If the HydroChill has been shipped
horizontally or at an angle, it will be
necessary to wait at least 8 hours before
setting it up, in order to allow the cooling
circuit to reset itself.
• Ensure that the unit is installed and
connected to the mains water and electricity supplies by a qualified
technician, in compliance with the manufacturer’s instructions and the local
safety regulations.
Note
there are no user serviceable part inside the HydroChill.