13
-
Filter of dust extractor is full/polluted by moist/oil
-
Grit is no longer good (too fine)
6.
Poor visibility inside the cabinet can also be caused by damaged protective foil, which is
placed over the viewing glass. This can easily be replaced by new foil. When the glass itself is
damaged, replace it by safety glass with the same thickness and measurements, you can get
this at your Zionair retailer.
Cleaning the dust extractor (not included)
Check the dust extractor after every 5 hours, remove dust by means of compressed air or vacuum
cleaner and removed clogged debris to ensure a proper functioning of the extractor.
6.
Specifications
Model
SB11A
Voltage
230V / 50Hz
Min. work pressure
4bar
Max. work pressure
8,6bar
Air consumption
680 L/min bij 8,6bar
Measurements cabinet
690x460x420mm
Weight
27kg
7.
Warranty
1.
The warranty enters into force on the date that is mentioned on the receipt and has a validity
of twelve months.
2.
The warranty is not transferable without written permission of your distributor.
3.
Warranty cannot be claimed without a receipt.
4.
Warranty only applies when the product is used according to the included manual and is
used exclusively in the way it was designed for.
5.
No changes can be made to the product.
6.
The warranty does not apply in case of injudicious use.
7.
Possible shipping costs are not covered by the warranty.
8.
Repairs should exclusively be carried out by your supplier. Repair(s) carried out by others will
result in cancellation of the warranty.
9.
Repairs that are carried out during the warranty period will not extend the validity of the
warranty. There will be given a warranty of three months on the repair itself in case the
regular warranty should expire.
10.
Potential maintenance of the product, as described in the user manual, should be carried out
on time.
11.
For the warranty U can only turn to the retailer where U bought the product.
