Subito Cotto MINI User Manual - Mod. 40
It is important that the “Subito Cotto” oven will be installed and used only in accordance with
these attached user manual, for your security and to ensure that the oven will functions properly.
We recommend you to read carefully the following instructions before using the oven. The safety
instructions, by themselves, do not eliminate danger completely, and proper accident prevention
measures must always be used.
PLACE AND SUPPORT BASE OF WORKING
Subito Cotto MINI oven can be used either in outdoor and indoor places. For internal use verify the
adequate aeration for the room where you use it. For outdoor use it is recommended a place
where there is not wind. The Subito Cotto MINI is made of weather resistant materials, but it is
recommended to cover it in non-use times.
Position the oven above a properly floor or base, ensure that can support the weight.
Position the oven far from any combustible material.
BURNER AND GAS CONNECTORS
Subito Cotto MINI it is standard configured to operate with GAS GPL. On request, before the
purchasing, there is the possibility to configure the oven with Methane or Propane GAS.
It is necessary to use a pressure regulator for connecting the Subito Cotto MINI to GPL cylinder.
This regulator must have the below specifications:
Capability:
7 kg/h
LOW Pression:
30 mbar
Connect the gas pipe screwing the die in the special grafting under the oven, use a properly gasket.
Use the appropriate gasket with standard pipe.
BURNER TECHNICAL SPECIFICATIONS
Thermal Potential
>
MIN 2KW – MAX 6KW
GAS Pressure >
From 2,5 to 50 mbar
GAS Pipe Size >
½ Inches
Burner Weight >
1,7 Kg
