Zimmer ZR1000-A Series, Инструкция по установке и эксплуатации

Страница: 10 / 13

10
10.1 Installing the product
►
Insert the straight pin into the designated fit on the product.
3
4
► Position the product on the robot using the straight pin.
►
Mount the product on the robot with the mounting screws.
• To tighten the mounting screws, there are threaded holes on the
underside of the product.
►
Align the axis compensation module centrically.
3
Straight pin (not included in the scope of delivery)
4
Mounting screw
10.2 Installing the energy supply
NOTICE
►
You can find the information in the technical data sheet on our website.
► Close off unused connections using suitable dummy plugs.
►
The authorized connections that are available can be found in the accessories list on our website. The
necessary ordering information can also be found there.
►
Use compressed air in accordance with DIN ISO 8573-1 [4:4:4].
►
Insert the screw fitting into a pneumatic
connection designated for this purpose.
6
5
5
Pneumatic connection
6 Push-fit fitting
INSTALLATION AND OPERATING INSTRUCTIONS: ZR1000-A
DDOC01702 / -
EN / 2022-09-27
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com