Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 85 / 173

70
Distance
menu
Submenu Unit Distance method Comments
Formula in the EFBW
setup
AFI cm
See meas. on distance AFI=AFI1+AFI2+AFI3
+AFI4
FBP cm
See meas. on distance
Cervical
length
cm
See meas. on distance
6.6.1
Estimated date of delivery
6.6.1.1
Calculating the EDD using LMP (last menstrual period)
1.
Update the LMP input box in the new patient registration sheet for obstetrics.
2.
Select the date of the last menstrual period from the dialogue box or input the LMP date directly.
3.
The calculated EDD value will appear in the result measurement values area on the obstetrics page.
6.6.1.2
Calculating the delivery date using BBT (basal body temperature)
4.
Update the ovulation date in the input box and enter the basal bodily temperature date on the new page for the pa-
tient’s obstetrics.
5.
The procedure is the same as that used with the LMP method.
6.6.2
Growth curves
Function: Comparison of growth curves is used to compare the measured data of the fetus with the normal growth curve
in order to judge whether the fetus is growing normally.
Measurement steps:
Complete the measurement of the obstetrics item and go to the report page.
Select the growth curve in the right list and press [ENTER] to display the growth curve. Select the re-
quired growth curve for display, and check the growth curve in the report. Click on the [×] icon on the
dialogue box to exit this function.
Tips: The abscissa of the growth curves are the gestational weeks calculated according to the patient's LMP information.