Zimmer Sonido Smart Скачать руководство пользователя страница 62

Страница: 62 / 173

5.10.3

Inputting comments from the character library

In comment status, move the trackball to the image area for editing;

Press [Font size] to adjust the font size of the comments; the range is 10~20;

Rotate [MENU] to select the required comments, then confirm using [MENU] to exit input;

5.10.4

Editing quick comments

Press [Edit] to quickly retrieve the quick comments editing box;

Inputting customised comments;

Press [Done] to finish editing; press [X] to cancel editing;

5.10.5

Inputting quick comments

Press [Text] to select the required quick comments;

Adjusting the front size of comments;

Press [Input] to place comments within the image area;

5.10.6

Moving comments

Move the trackball into the comment status and press the ENTER key to activate it;

Move the trackball to move the comment to the target area;

Press ENTER again to confirm the comment;

5.10.7

Editing comments

Move the trackball in comment status and press the ENTER button to activate it;

Press [BACKSPACE] to delete unnecessary characters;

Press [ENTER] to confirm;

5.10.8

Deleting comments

Deleting characters

In comment status, activate the comment to be deleted, then press the

ENTER

key, and "|" is displayed on the

screen; press the [BACKSPACE] key to delete the character.

Deleting an individual comment

Activate the comment that needs to be deleted and press [DEL] to delete the comment;

Deleting the entire content of a comment

Do not activate the individual comment; press [DEL] to delete all characters that have an input;

CAUTION:

Press the [DEL] key, but this deletes the measurement and body marker at the same time.

Setting the position of a default comment

Содержание Sonido Smart














































































































































































Результаты поиска

Содержание Sonido Smart

Отзывы:

Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 62 / 173

Результаты поиска

Содержание Sonido Smart

Отзывы: