Zimmer Sonido Smart Скачать руководство пользователя страница 123

Страница: 123 / 173

108

Chapter 8 System maintenance

8.1

Cleaning the machine

CAUTION:

Turn the device off before cleaning and pull the cable out from the socket. There is the possibility of

electric shock if the device is on.

Cleaning procedure:

Use a soft, dry cloth to wrap around the machine. If the device is quite dirty, use soft, damp cloth. After wiping

away the stains, use a soft, dry cloth to wipe dry.

CAUTION:

Do not use any organic solvents such as alcohol, otherwise the surface may get ruined.

When cleaning the machine, do not let any liquid get into the machine, otherwise it may malfunction

and lead to electric shock.

If it becomes necessary to clean the probe port and the peripheral device, please contact the sales

office, customer service team or representative of ZIMMER MEDIZINSYSTEME. Any self-attempted

cleaning may result in a malfunction or a deterioration in the functionality of the device.

8.2

Probe maintenance

The probes used by this device can be divided into two series: Body surface probes and intra-cavity

probes. For all ultrasound examinations, the level of
ultrasonic radiation on the human body must be kept as low as possible.

CAUTION:

Probes may only be used by persons who have been specially trained to do so.

Probes may not be sterilised in a pressure steriliser. If you need to work in a sterile area, use a disposa-

ble sterile probe hood.

Make sure that the transducer is not dropped onto a hard surface. This can damage the transducer ele-

ments and compromise the electrical safety of the transducer.

When using the device, make sure not to scratch the probe surface.

Avoid kinking or pinching the transducer cable.

Make sure that the probe is not plugged directly into the socket and that its accompanying cable is not

immersed in any kind of liquid. Keep the probe clean and dry. Turn off the device or put it in standby

mode when mounting or dismounting the probe. Make sure that the ambient temperature of the probe

does not exceed 50 degrees.

Содержание Sonido Smart














































































































































































Результаты поиска

Содержание Sonido Smart

Отзывы:

Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 123 / 173

Результаты поиска

Содержание Sonido Smart

Отзывы: