Zimmer Sonido Smart Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 173

Zimmer Sonido Smart Скачать руководство пользователя страница 118

103

Select Extras and press [MENU] and the following interface appears. Open the function via the corresponding control
area.

The user interface for setting the examination mode of the probe:

Select the required probe and the appropriate examination mode.
Exam mode Lib: Display all available examination modes. Exam mode selected: Display the examination modes in the

probe column.
>: Import the selected examination modes from the exam mode bib column to the exam mode selected column.
>>: Import all examination modes from the exam mode bib column into the exam mode selected column.
<: delete the selected examination modes from the exam mode selected column.
<<: delete all examination modes from the exam mode selected column.
Set as default: Set the selected examination modes in the exam mode selection column as default Move up: Move se-

lected examination modes up in the exam mode selection column.
Move down: Move selected examination modes down in the exam mode selection column. Copy to: Copy the exam

mode selection to the examination mode of a specified preset.

7.5.2

Examination mode selection

The user can define the required examination mode in detail, including annotations, body markers, importing and

exporting the measurement menu etc.

«
...
116
117
118
119
120
...
»

Содержание Sonido Smart














































































































































































Отзывы:

Нет отзывов