6
3 Proper use
NOTICE
The product is only to be used in its original state with its original accessories, with no unauthorized changes and
within the stipulated parameter limits and operating conditions.
The product is intended to be used exclusively in pairs for picking up workpieces and for swiveling and
positioning them according to the technical design.
Any other or secondary use is deemed improper.
►
Operate the product only in compliance with the associated installation and operating instructions.
►
Operate the product only when it is in a technical condition that corresponds to the guaranteed parameters
and operating conditions.
Ö
Zimmer GmbH shall accept no liability for any damage caused by improper use. The operator bears sole
responsibility.
The product is not suitable for clamping workpieces during a machining process.
The product is designed exclusively for pneumatic operation.
The product is designated for use in closed facilities.
Direct contact with perishable goods/food is not permitted.
4
Personnel qualification
Installation, commissioning and maintenance may only be performed by trained specialists. These persons must have read
and understood the installation and operating instructions in full.
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
SB/SBZ
DDOC00246 / d
EN / 2022-11-09
Содержание SB Series
Страница 2: ......
