manualshive.com logo in svg

Zimmer HF150-003, Инструкция по установке и эксплуатации, Страница: 16 / 40

Поделиться
Скачать
Zimmer HF150-003 Скачать руководство пользователя страница 16

INSTALLATION AND OPERATING INSTRUCTIONS:

 

Motor spindle, HF150-003 series 

Zimmer GmbH 

•

 Im Salmenkopf 5 

•

 77866 Rheinau, Germany 

•

 

 

+49 7844 9138 0 

• 

 +49 7844 9138 80 

•

 www.zimmer-group.com

16

EN / 2020-10-22

DDOC00746 / -

9.4  Installing the attachment part

As an option, a mechanically customized interface can be added to the motor spindle (e.g. to hold a C-axis or unit carrier).

With attachment part

Without attachment part

The mechanical interface is customized to match the specific motor spindle and therefore must not be replaced or mounted 

to a different motor spindle.

CAUTION:

Damage to the motor spindle

The customized interface guarantees the function of the product.

 

Ö

The mechanically customized interface must not be dismantled!

Material damage and malfunction of the motor spindle

Attachments parts on the housing and spindle neck must not introduce any additional forces or vibrations to the 

motor spindle.

Содержание HF150-003









































Отзывы:

Нет отзывов