INSTALLATION AND OPERATING INSTRUCTIONS:
GPH8000
INSTALLATION AND OPERATING INSTRUCTIONS:
GPH8000
EN / 2021-10-19
EN / 2021-10-19
6 Functional description
The product has two pneumatic pistons that are vented on both sides. Alternating ventilation sets the gripper jaws in
motion. The power supply can be made one-way or two-way.
1
Clamping element
2
Drive
3
Stroke limitation
4
Gripper jaw
5
Power supply
6
Terminal block
7
Round guide
8
Synchronization
2
1
3
4
5
6
7
8
Clamping elements are used to secure the gripper jaws. This securing element is transfered to both gripper jaws by the
synchronization in the CL-00 variant. In the CL-30 variant, two clamping elements are installed. These can be actuated
independently of each other. There are no clamping elements installed in the N-00 variant. The clamping elements are
pre-tensioned by a spring in order to secure the jaw position in case of a drop in pressure. Applying pressure releases the
clamping element.
CL-00 variant
9
bl
CL-30 variant
bn
9
bm
bl
9
Open clamping element 1
bm
Clamping element 2 (CL-30 variant)
bl
Clamping element 1
bn
Open clamping element 2 (CL-30
variant)
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
DDOC00289 / b
DDOC00289 / b
6
7
