11
8 Accessories
INFORMATION
If any accessories not sold or authorized by Zimmer GmbH are used, the function of the product cannot be
guaranteed. Zimmer GmbH accessories are specifically tailored to the individual products.
►
For optional accessories and those included in the scope of delivery, refer to our website.
8.1 Sensors
Example image of a combination consisting of
a stationary part, loose part and storage
station.
5
5
6
The sensors of the storage station check
whether the loose part is present in the storage
station and the locking is ensured.
The sensor of the stationary part checks
whether the loose part and stationary part are
connected.
5
Sensor of storage station
6
Sensor of stationary part
9 Transportation/storage/preservation
►
Transport and storage of the product must be done only with the original packaging.
►
If the product has already been installed on the superordinate machine unit, care must be taken during transport to
ensure that no unexpected movements can occur.
►
Before commissioning the product and after transport, check all power and communication connections as well as
all mechanical connections.
►
If the product is stored for an extended period, the following points are to be observed:
►
Keep the storage location as dust-free and dry as possible.
►
Avoid temperature fluctuations/observe and adhere to the temperature range.
►
Avoid wind/drafts/water condensation formation.
►
Cover the product with a weatherproof, tear-resistant foil to prevent dust.
►
Pack the product and do not expose it to direct sunlight during storage.
►
Clean all components. There must be no soiling left on the components.
►
Visually inspect all components.
►
Remove all foreign substances.
►
Properly remove potential corrosion spots.
►
Close electrical connections using suitable covers.
INSTALLATION AND OPERATING INSTRUCTIONS:
FWR
DDOC01406 / -
EN / 2022-05-10
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Содержание FWR Series
Страница 2: ......
